QINGDAO SHENGHUALONG RUBBER MACHINERY CO.,LTD
Take science and technology as motive force,survive by quality.
Add to Cart
| Model & Specifications | DTG-1800×3300A | |
| Interior Diameter of Container(mm) | 1800 | |
| Working Length of C0ntainer(mm) | 3300 | |
| Working Pressure 0f Container (Mpa) | 4 | |
| Working Temperature (Cº) | 250 | |
| Heating Medium | Steam-gas | |
| Major Pressurized Material | 16MnR | |
| Container Classification | Q345R | |
| Rotating Speed of Mixing Shaft(r/min) | 10 | |
| Main Motor Power(KW) | 55 | |
| Heating Method | Electrical Heating | |
| Total Cubage (m³) | 10 | |
| Overall Dimension(mm) | Length | 7150 |
| Height | 2950 | |
| width | 2150 | |
| Weight(Kg) | 16000 | |
rubber. Before and after the roll surface is smooth, like a waist drum. Refining machine during operation, It can be hard rubber impurities from the roller center to both ends. Impurities gathered at the edge of the
roller, Then use knife remove to impurities on the edge of roller. Roll adopts the vanadium titanium alloy chilled cast iron, the surface is hard wearresisting, inner cavity machining, the roll surface temperature
uniformity. The machine is equipped with an emergency brake, When emergency occurs, pull the pull rod, the machine immediately brake, safe and reliable.
Driving system consists of NGW hardened tooth surface reducer, compact structure, low noise, high efficiency, longservice life.
| Type Technical parameter | XKJ-450 |
| Front roll diameter(mm) | 450(Waist-drum) |
| Rear roll diameter(mm) | 510(Waist-drum) |
| Working length of rolls(mm) | 1000 |
| rear roll surface speed(m/min) | 56 |
| Friction ratio | 1:1.29 |
| Max. nip(mm) | 10 |
| Motor power(KW) | 55 |
| Overall dimension: L×W×H | 4900×2100×1400
|