QINGDAO SHENGHUALONG RUBBER MACHINERY CO.,LTD
Take science and technology as motive force,survive by quality.
Add to Cart
1.Maximum Dispersion & High Production
Double blades with special spiral angle, proper clearance & high cooling effect gives excellent dispersion which can not be obtained from an open mill. Its production is 4 to 5 times more than an ordinary mixing mill thus saving on labor and electricity.
2.Super sealing,no powder leakages.
Both sides of the rotor blades are injected welding a iron alloy ring, which assures sealing and protects the blades from abrasion.Imported bakelite sealing ring,which make super sealing.The chamber around are designed with groove,then embeded with rubber stip,this make sure the whole mixing chamber is well sealed.
3.No Foundation Requirement
The Kneader has a common bed plate for all parts and not require foundation.
4.Easy Cleaning & Colour Change
Mixing chamber can be tilted down for 140degree, which enables easy cleaning, because of this, different coloured compounds can be made without trouble.
5.Easy Operation
Easy operation with Push-buttons and hand lever valves from the operation board.
6.Short Mixing Time
Mixing time ranges from 6 to 12 minutes depending on compound's specific gravity.
| Model | X(S)N- 10X32 | X(S)N- 20X32 | X(S)N- 35X30 | X(S)N- 55X30 | X(S)N- 75X30 | X(S)N- 110x30 | X(S)N- 150x30 |
| Total volume of mixing chamber | 25L | 45L | 75L | 125L | 180L | 250L | 325L |
| Working volume of mixing chamber | 10L | 20L | 35L | 55L | 75L | 110L | 150L |
| Driving motor power | 15KW | 30KW | 55KW | 75KW | 110KW | 185KW | 220KW |
| Tilting motor power | 1.1KW | 1.5KW | 2.2KW | 2.2KW | 4KW | 4KW | 5.5KW |
| Tilting angle | 140° | 140° | 140° | 140° | 140° | 140° | 140° |
| Rotational speed of the rotor (front/rear) | 32/23.5 r/min | 32/25 r/min | 30/24.5 r/min | 30/24.5 r/min | 30/24.5 r/min | 30/24.5 r/min | 30/24.5 r/min |
| Pressure of compressed air | 0.5-0.8 MPa | 0.5-0.8MPa | 0.5-0.8MPa | 0.6-0.8MPa | 0.6-08MPa | 0.6-0.8MPa | 0.6-0.8MPa |
| Capacity of compressed air | ≥0.5m³/min | ≥0.7m³/min | ≥0.9m³/min | ≥1.0m³/min | ≥1.0m³/min | ≥1.5m³/min | ≥2.0m³/min |
| Pressure of cooling water | 0.2-0.4 MPa | 0.2-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa |
| Pressure of heating steam (plastic mixing) | 0.5-0.8Mpa | 0.5-0.8Mpa | 0.5-0.8Mpa | 0.5-0.8Mpa | 0.5-0.8Mpa | 0.5-0.8Mpa | 0.5-0.8Mpa |
| Overall dimension | 2580X1300 X2280mm | 2630X1520 X2550mm | 3200X1900 X2950mm | 3280X1930 X3070mm | 3330X2620 X3340mm | 3930X3000 X3660mm | 4200X3300 X3900mm |